STOPPER REFRACTORIES FOR STEEL TEEMING FROM LADLE ACCORDING TO DSTU GOST 5500:2006

PBSP-88 (insert)

PBSP-88 (INSERT)

Refractory stopper products for steel teeming from ladle.

At the customer request nonfired insert is subject to paraffin treatment.

The products are wrapped into cardboard or paper, wrapped with stretch-film and laid into wooden case with laid along the perimeter cardboard. The layers are laid with cardboard or liner, and the gaps between the products, from case walls and under the cover are filled with wood chips or flakes.
Parameter descriptionValue
Typehigh-magnesia
Grouppericlase (MgO ≥ 85%)
Refractoriness valuefire resistance (1580 to 1770°С)
Porosity degreeaverage dense (Ptot 20-30%)
Heat treatment methodunburnt
Molding processsemidry forming
Binding type 1with inorganic binders
Binding type 2ceramic
Intended purposetechnology
scope of applicationfor steel teeming from ladle
Reference document for product propertiesStopper refractories for steel teeming from ladle according to DSTU GOST 5500:2006
Reference documents for product dimensionsStopper refractories for steel teeming from ladle according to DSTU GOST 5500:2006
Parameter descriptionValue
Apparent specific gravity, g/сm3≥ 2,65
Humidity weight content, %≤ 0,6
Interconnected porosity, %, not more than21
MgO, %≥ 88
FormArticle No.Additional informationPhoto
insertNo.35 (d 35mm)Insert used in combination with nozzles No.No.25, 26 and plug No.9.PBSP-88 (insert) insertmark-141-conf-245-small.jpg
No.36 (d 40mm)Insert used in combination with nozzles No.No.27, 28, 29, 30, 33, 34 and plugs No.10, 11.
No.36 (d 60mm)Insert used in combination with nozzles No.No.27, 28, 29, 30, 33, 34 and plug No.10, 11.
FormArticle No.Dimension, mmDrawing
insertNo.35 (d 35mm)h = 57
d = 35
d1 = 71
d2 = 76
d3 = 43
r = 35
e = 29
k = 56		insert
No.36 (d 40mm)h = 62
d = 40
d1 = 94
d2 = 98
d3 = 52
r = 45
e = 39
k = 70
No.36 (d 60mm)h = 62
d = 60
d1 = 94
d2 = 98
d3 = 62
r = 40
e = 32
k = 70