REFRACTORIES FOR SYPHON STEEL TEEMING ACCORDING TO DSTU GOST 11586:2006

SHS-32

SHS-32

Chamotte refractories of SHS-32 grade are used for steel pouring with the help of syphon method into casting-form and moulds, intermediate funnels with nozzles - for top casting.

SHS-32 No.41 (rectangular four-way collar star) and nozzles (SHS-32 No.No.88, 89, 92) intended for export are wrapped into cardboard or paper, wrapped with stretch-film and laid into wooden case with laid along the perimeter cardboard. The layers are laid with cardboard or liner, and the gaps between the products, from case walls and under the cover are filled with wood chips or flakes.

Siphon tubes (SHS-32 No.No.69-71, 74-77, 82-86) and nozzles (SHS-32 No.No.88, 89, 92) are laid on wooden pallet, interlaid with cardboard sheets, wrapped with stretch film and bundled with polypropylene or polyester strip. 

Funnels (SHS-32 No.No.1, 3, 4) are laid on wooden pallet, interlaid with cardboard sheets, wrapped with stretch film, covered with wooden cover and bundled with polypropylene (or polyester) strip. 

Rising pipes (SHS-32 No.No.6-10) and stars (SHS-32 No.No.31, 33, 35, 36, 41) are laid on wooden pallet, interlaid with cardboard sheets, protected with angles along the perimeter, wrapped with stretch film and bundled with polypropylene (or polyester) strip.
Parameter descriptionValue
Typealuminosilicate
Groupchamotte (Al2O3 28-45%)
Refractoriness valuefire resistance (1580 to 1770°С)
Porosity degreeaverage dense (Ptot 20-30%)
Heat treatment methodburnt
Molding processsemidry/soft mud
Binding type 1with inorganic binders
Binding type 2ceramic
Intended purposetechnology
scope of applicationfor steel pouring with the help of syphon method into casting-form and moulds, intermediate funnels with nozzles - for top casting
Reference document for product propertiesRefractories for syphon steel teeming according to DSTU GOST 11586:2006
Reference documents for product dimensionsRefractories for syphon steel teeming according to DSTU GOST 11586:2006
Parameter descriptionValue
Al2O3, %≥ 32
Fire resistance, °С, not less than1690
Interconnected porosity, %, not more than15-24
Residual variation of dimension at heating, %, not more than, at temperature0,4 (1350 °С)
Thermal resistance, thermal cycles, not less than1
FormArticle No.Additional informationPhoto
barNo.75 (L 150mm, d 40mm)No.75 (L 150mm, d 40mm)mark-92-conf-243-small.jpg
funnelNo.1SHS-32 funnelmark-92-conf-246-small.jpg
No.3
No.4
end syphon tubeNo.84 (L 150mm, d 40mm)mark-92-conf-271-small.jpg
No.84 (L 200mm, d 40mm)
No.84 (L 250mm, d 40mm)
No.84 (L 300mm, d 40mm)
No.85 (L 150mm)
No.85 (L 200mm)
No.85 (L 250mm)
No.85 (L 300mm)
through syphon tubeNo.69 (L 150mm)SHS-32 through syphon tubemark-92-conf-278-small.jpg
No.69 (L 200mm)
No.69 (L 250mm)
No.69 (L 300mm)
No.70 (L 150mm)
No.70 (L 200mm)
No.70 (L 250mm)
No.70 (L 300mm)
No.71 (L 150mm)
No.71 (L 200mm)
No.71 (L 300mm)
through syphon tube with side holeNo.75 (L 200mm, d 40mm)SHS-32 through syphon tube with side holemark-92-conf-279-small.jpg
No.75 (L 300mm, d 40mm)
No.76 (L 150mm, d 40mm)
No.76 (L 200mm)
No.76 (L 250mm)
No.76 (L 300mm)
No.77 (L 150mm)
rectangular four-way star with slotNo.31SHS-32 rectangular four-way star with slotmark-92-conf-280-small.jpg
No.33
No.35
No.36Subject to the parties agreement it is acceptable to produce the products in the form of scalenous octagonal prisms with plane with output hole base size 120mm.
nozzle for casting-formNo.88 (d 50mm)mark-92-conf-282-small.jpg
No.89
No.90No.90
angle syphon tubeNo.82SHS-32 angle syphon tubemark-92-conf-284-small.jpg
No.83
rising pipeNo.10 (H 300mm, d 100mm)SHS-32 rising pipemark-92-conf-285-small.jpg
No.10 (H 300mm, d 120mm)
No.10 (Н 250mm, d 100mm)
No.10 (Н 250mm, d 120mm)
No.6
No.6 (H 250mm)
No.6 (H 300mm)
No.7 (H 250mm)
No.7 (H 300mm)
No.8 (H 250mm)
No.8 (H 300mm)
No.86 (L 150mm)
No.9 (H 300mm)
six-way star with slotNo.62mark-92-conf-351-small.jpg
rectangular four-way star с shaft collarNo.41mark-92-conf-355-small.jpg
through syphon tube with two shaft collarsNo.74 (L 200mm)mark-92-conf-356-small.jpg
nozzle for intermediate funnelsNo.92 (d 50mm)mark-92-conf-357-small.jpg
customer drawing
FormArticle No.Dimension, mmDrawing
barNo.75 (L 150mm, d 40mm)bar
funnelNo.1UNDEFfunnel
No.3UNDEF
No.4UNDEF
end syphon tubeNo.84 (L 150mm, d 40mm)B = 80
D1 = 62
D2 = 56
d = 40
L = 150
l = 10
K = 25		end syphon tube
No.84 (L 200mm, d 40mm)B = 80
D1 = 62
D2 = 56
d = 40
L = 200
l = 10
K = 25
No.84 (L 250mm, d 40mm)B = 80
D1 = 62
D2 = 56
d = 40
L = 250
l = 10
K = 25
No.84 (L 300mm, d 40mm)B = 80
D1 = 62
D2 = 56
d = 40
L = 300
l = 10
K = 25
No.85 (L 150mm)B = 100
D1 = 78
D2 = 72
d = 50
L = 150
l = 12
K = 30
No.85 (L 200mm)B = 100
D1 = 78
D2 = 72
d = 50
L = 200
l = 12
K = 30
No.85 (L 250mm)B = 100
D1 = 78
D2 = 72
d = 50
L = 250
l = 12
K = 30
No.85 (L 300mm)B = 100
D1 = 78
D2 = 72
d = 50
L = 300
l = 12
K = 30
through syphon tubeNo.69 (L 150mm)B = 80
D1 = 62
D2 = 56
d = 35
d1 = 65
d2 = 60
L = 150
l = 10
l1 = 8		through syphon tube
No.69 (L 200mm)B = 80
D1 = 62
D2 = 56
d = 35
d1 = 65
d2 = 60
L = 200
l = 10
l1 = 8
No.69 (L 250mm)B = 80
D1 = 62
D2 = 56
d = 35
d1 = 65
d2 = 60
L = 250
l = 10
l1 = 8
No.69 (L 300mm)B = 80
D1 = 62
D2 = 56
d = 35
d1 = 65
d2 = 60
L = 300
l = 10
l1 = 8
No.70 (L 150mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 150
l = 12
l1 = 10
No.70 (L 200mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 200
l = 12
l1 = 10
No.70 (L 250mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 250
l = 12
l1 = 10
No.70 (L 300mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 300
l = 12
l1 = 10
No.71 (L 150mm)B = 120
D1 = 94
D2 = 88
d = 60
d1 = 100
d2 = 94
L = 150
l = 21
l1 = 18
No.71 (L 200mm)B = 120
D1 = 94
D2 = 88
d = 60
d1 = 100
d2 = 94
L = 200
l = 21
l1 = 18
No.71 (L 300mm)B = 120
D1 = 94
D2 = 88
d = 60
d1 = 100
d2 = 94
L = 300
l = 21
l1 = 18
through syphon tube with side holeNo.75 (L 200mm, d 40mm)B = 80
D1 = 62
D2 = 56
d = 40
d1 = 65
d2 = 60
L = 200
L1 = 75
l = 10
l1 = 8		through syphon tube with side hole
No.75 (L 300mm, d 40mm)B = 80
D1 = 62
D2 = 56
d = 40
d1 = 65
d2 = 60
L = 300
L1 = 75
l = 10
l1 = 8
No.76 (L 150mm, d 40mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 150
L1 = 75
l = 12
l1 = 10
No.76 (L 200mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 200
L1 = 75
l = 12
l1 = 10
No.76 (L 250mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 250
L1 = 75
l = 12
l1 = 10
No.76 (L 300mm)B = 100
D1 = 78
D2 = 72
d = 50
d1 = 81
d2 = 76
L = 300
L1 = 75
l = 12
l1 = 10
No.77 (L 150mm)B = 120
D1 = 94
D2 = 88
d = 60
d1 = 100
d2 = 94
L = 150
L1 = 75
l = 21
l1 = 18
rectangular four-way star with slotNo.31rectangular four-way star with slot
No.33UNDEF
No.35UNDEF
No.36UNDEF
nozzle for casting-formNo.88 (d 50mm)UNDEFnozzle for casting-form
No.89UNDEF
No.90UNDEF
angle syphon tubeNo.82UNDEFangle syphon tube
No.83UNDEF
rising pipeNo.10 (H 300mm, d 100mm)UNDEFrising pipe
No.10 (H 300mm, d 120mm)UNDEF
No.10 (Н 250mm, d 100mm)UNDEF
No.10 (Н 250mm, d 120mm)UNDEF
No.6
No.6 (H 250mm)UNDEF
No.6 (H 300mm)UNDEF
No.7 (H 250mm)UNDEF
No.7 (H 300mm)UNDEF
No.8 (H 250mm)UNDEF
No.8 (H 300mm)UNDEF
No.86 (L 150mm)B = 120
D1 = 94
D2 = 88
d = 60
L = 150
l = 21
K = 40
No.9 (H 300mm)UNDEF
six-way star with slotNo.62A = 260
H = 115
H1 = 65
h = 12
h1 =10
D1 = 126
D2 = 121
d = 90
d1 = 81
d2 = 76
d3 = 50		six-way star with slot
rectangular four-way star с shaft collarNo.41A = 210
H = 115
H1 = 65
h = 21
h1 =10
D1 = 150
D2 = 140
d = 100
d1 = 81
d2 = 76
d3 = 50		rectangular four-way star с shaft collar
through syphon tube with two shaft collarsNo.74 (L 200mm)B = 120
D1 = 94
D2 = 88
d = 60
L = 200
l = 21		through syphon tube with two shaft collars
nozzle for intermediate funnelsNo.92 (d 50mm)UNDEFnozzle for intermediate funnels
customer drawing