SILICA REFRACTORIES FOR COKE FURNACES 
SPECIFICATION OF UKRAINE 23.2-00191738-001:2020

DK-1

DK-1 grade silica refractories are used in by-product coking industry. In particular, they are used for laying of coke furnaces with coking chamber volume more than 40m3. Scope of application of DK-1 grade products: wall, head products, vertical heating flue areas and vertical heating flue crossovers, abradable by coke, bottom and etc. Herein, depending on application, there are changed the properties of such products: compression ultimate strength is higher (50 N/mm2), and interconnected porosity is less (16%) in baked in the hearth products.

The products are supplied on wooden pallets interlaid with cardboard, with protected corners, wrapped with stretch film and bundled with plastic strip.
Parameter descriptionValue
Typesiliciferous
Groupsilica (SiO2 > 93%)
Refractoriness valuefire resistance (1580 to 1770°С)
Heat treatment methodburnt
Molding processsemidry forming
Binding type 1with inorganic binders
Binding type 2ceramic
Intended purposerepair/construction
Reference document for product propertiesSilica refractories for coke furnaces 
Specification of Ukraine 23.2-00191738-001:2020
Reference documents for product dimensionsRefractories of general purpose according to DSTU GOST 8691:2009 (ISO 5019-1-84) (with amendments No.1,2,3,4)
Parameter descriptionValue
Al2O3, %≤2
Apparent specific gravity, g/сm31,85-1,9
CaO, %≤3
Compression ultimate strength, N/mm2, not less than28
Creep flow at the temperature 1450°С - 0.2 MPa 5-25 hours, %0,12
Density, g/сm32,37
Fe2O3, %≤1
Interconnected porosity, %, not more than24,5
Na2O + K2O, %≤0,35
Residual quartz, %2,0
Residual variation of dimension (growth)0,4 (1450°С)
SiO2, %≥94,5
Temperature of deformation under load, °С1640
FormArticle No.Additional informationPhoto
UNDEFUNDEF
FormArticle No.Dimension, mmDrawing
UNDEF