PERICLASE-CHROME HIGH REFRACTORY PRODUCTS FOR LAYING OF ARCHES OF STEELMAKING FURNACES ACCORDING TO ACCORDING TO DSTU 2573-94 (GOST 10888-93)

PHSS

PHSS

High-refractory burnt periclase-chrome products are used for melting space arch of open-hearth furnaces with the capacity of 200-300 t, operating with moderate relative intensity of bath lancing (7-10m3/(t·h)).

The products are laid on wooden pallet, laid with cardboard sheets, protected with cardboard angles along the perimeter, wrapped with stretch-film and bundled with polypropylene strip.
Parameter descriptionValue
Typemagnesia spinel
Grouppericlase-chrome (MgO ≥ 60%, Cr2O3 4-20%)
Refractoriness valuehigh fire resistance (1770 to 2000°С)
Porosity degreeaverage dense (Ptot 20-30%)
Heat treatment methodburnt
Molding processsemidry forming
Binding type 1with inorganic binders
Binding type 2ceramic
Intended purposerepair/construction
scope of applicationfor laying of arches of open-hearth furnaces
Reference document for product propertiesPericlase-chrome high refractory products for laying of arches of steelmaking furnaces according to according to DSTU 2573-94 (GOST 10888-93)
Reference documents for product dimensionsPericlase-chrome high refractory products for laying of arches of steelmaking furnaces according to DSTU 2573-94 (GOST 10888-93)
Parameter descriptionValue
Additional linear shrinkage, %, not more than, at temperature, °С(1650°C) 0,9
Compression ultimate strength, N/mm2, not less than27,5
Cr2O3, %7-15
Fusion point, °С, not less than1520
Interconnected porosity, %, not more than22
MgO, %≥ 65
Thermal resistance, thermal cycles, not less than3 (1300°C)
FormArticle No.Additional informationPhoto
radial double-sided feather-edged brickNo.35mark-49-conf-253-small.jpg
edge double-sided feather-edged brickNo.28mark-49-conf-254-small.jpg
No.29
No.30
No.31
No.32
No.33
No.34
front double-sided feather-edged brickNo.10PHSS front double-sided feather-edged brickmark-49-conf-257-small.jpg
No.11
No.12
No.9
straight brickNo.1mark-49-conf-261-small.jpg
No.2
pyramidal sided feather-edged brickNo.42mark-49-conf-321-small.jpg
FormArticle No.Dimension, mmDrawing
radial double-sided feather-edged brickNo.35L = 230
B = 115
B1 = 93
S = 65
radial double-sided feather-edged brick
edge double-sided feather-edged brickNo.28L = 230
B = 115
S = 68
S1 = 45
No.29L = 230
B = 115
S = 65
S1 = 55
No.30L = 230
B = 150
S = 65
S1 = 55
No.31L = 300
B = 150
S = 65
S1 = 55
No.32L = 300
B = 150
S = 75
S1 = 55
No.33L = 300
B = 150
S = 75
S1 = 65
No.34L = 300
B = 150
S = 90
S1 = 80
front double-sided feather-edged brickNo.10L = 230
B = 115
S = 65
S1 = 55
front double-sided feather-edged brick
No.11L = 300
B = 150
S = 75
S1 = 68
No.12L = 300
B = 150
S = 85
S1 = 68
No.9L = 230
B = 115
S = 65
S1 = 45
straight brickNo.1L = 230
B = 115
S = 65
straight brick
No.2L = 300
B = 150
S = 75
pyramidal sided feather-edged brickNo.42L = 230
B = 115
B1 = 93
S = 65
S1 = 55