ALUMINOSILICATE REFRACTORIES FOR CUPOLA FURNACE LINING ACCORDING TO DSTU GOST 3272:2006

SHVG-35

used for kiln, melting ring, tuyere area lining

The products are supplied on wooden pallets interlaid with cardboard, with protected corners, wrapped with stretch film and bundled with polypropylene or polyester strip.
Parameter descriptionValue
Typealuminosilicate
Groupchamotte (Al2O3 28-45%)
Refractoriness valuefire resistance (1580 to 1770°С)
Porosity degreecompacted (Ptot 16-20%)
Heat treatment methodburnt
Molding processsemidry forming
Binding type 1with inorganic binders
Binding type 2ceramic
Intended purposerepair/construction
scope of applicationlining of iron receiver, melting belt, tuyere area
Reference document for product propertiesAluminosilicate refractories for cupola furnace lining according to DSTU GOST 3272:2006
Reference documents for product dimensionsAluminosilicate refractories for cupola furnace lining according to DSTU GOST 3272:2006
Parameter descriptionValue
Al2O3, %≥35
Compression ultimate strength, N/mm2, not less than30
Fire resistance, °С, not less than1730
Fusion point, °С, not less thannot defined
Interconnected porosity, %, not more than20
Residual variation of dimension (growth)-
Residual variation of dimension, %, not more than, at temperature(1400°C) ± 0,2
FormArticle No.Additional informationPhoto
straight brickNo.3rectangular brickmark-74-conf-261-small.jpg
feather-edged brickNo.1mark-74-conf-389-small.jpg
No.2
No.8
trapezoidal feather-edged brickNo.4mark-74-conf-390-small.jpg
No.5
No.6
No.7
FormArticle No.Dimension, mmDrawing
straight brickNo.3UNDEFstraight brick
feather-edged brickNo.1UNDEFfeather-edged brick
No.2UNDEF
No.8UNDEF
trapezoidal feather-edged brickNo.4UNDEFtrapezoidal feather-edged brick
No.5UNDEF
No.6UNDEF
No.7UNDEF