CHAMOTTE REFRACTORIES FOR CAST LADLES LINING ACCORDING TO GOST 15635-70 (WITH AMENDMENTS NO.1,2,3)

SHCHU-37

SHCHU-37

Sealed products are used for cast ladles lining
The products are supplied on wooden pallets interlaid with cardboard, with protected corners, wrapped with stretch film and bundled with polypropylene or polyester strip.
Parameter descriptionValue
Typealuminosilicate
Groupchamotte (Al2O3 28-45%)
Refractoriness valuefire resistance (1580 to 1770°С)
Porosity degreecompacted (Ptot 16-20%)
Heat treatment methodburnt
Molding processsemidry forming
Binding type 1with inorganic binders
Binding type 2ceramic
Intended purposerepair/construction
scope of applicationfor cast ladles lining
Reference document for product propertiesChamotte refractories for cast ladles lining according to GOST 15635-70 (with amendments No.1,2,3)
Reference documents for product dimensionsChamotte refractories for cast ladles lining according to GOST 15635-70 (with amendments No.1,2,3)
Parameter descriptionValue
Additional linear shrinkage, %, not more than, at temperature, °С(1400°C) 0,4
Al2O3, %≥37
Compression ultimate strength, N/mm2, not less than25
Fire resistance, °С, not less than1730
Interconnected porosity, %, not more than20
FormArticle No.Additional informationPhoto
symmetrical feather-edged brickNo.1For working lining of cylindrical part of ladles with inner laying radius, mmmark-96-conf-256-small.jpg
No.2For working lining of cylindrical part of ladles with inner laying radius, mm
No.3for working lining of spherical bottom with inner laying radius 1150-2150mm
No.4for working lining of spherical bottom with inner laying radius 1150-2150mm
No.5Similar, at bottom payload laying
No.6for working lining of spherical bottom with inner laying radius 1150-2150mm
No.7for working lining of spherical bottom with inner laying radius 1150-2150mm
No.8for working lining of spherical bottom with inner laying radius 1150-2150mm
No.9Similar, at laying of bottom payload
radial brickNo.10For central part of spherical bottom with inner laying radius 1150-2150mmmark-96-conf-392-small.jpg
No.11For central part of spherical bottom with inner laying radius 1150-2150mm
FormArticle No.Dimension, mmDrawing
symmetrical feather-edged brickNo.1UNDEF
No.2UNDEF
No.3UNDEF
No.4UNDEF
No.5UNDEF
No.6UNDEF
No.7UNDEF
No.8UNDEF
No.9UNDEF
radial brickNo.10UNDEF
No.11UNDEF