• GIR - home
  • Selection of products according to the parameters

SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS

Type
Group
Refractoriness value
Grain size
Physical condition when delivered
Thermal and additional treatment
Method of laying, compacting, application
Group, depending on intended purpose
Intended purpose
Reference document for product properties
Filter result:
products found: 18
SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 2 AND id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 18 AND value IN (170)) AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 0

ACID RESISTANT POWDER

Type: siliciferous
Group: silica (SiO2 > 93%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: dry
Group, depending on intended purpose: fire resistant powders and fillers
Intended purpose: filler in acid-resisting cement is used at lining, joint sealing at plates laying, removal of cracks and hoes, pipes coating

MKG-1

Type: siliciferous
Group: silica with additions (SiO2 80-93%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: moldable
Method of laying, compacting, application: sand throwing packing
Group, depending on intended purpose: fire resistant masses and mixes, including concrete
Intended purpose: for solid lining of steel teeming ladles с with the help of sand-throwing machines

MP-18

Type: aluminosilicate
Group: semiacid (Al2O3 10-28%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: semidry
Thermal and additional treatment: thermo-hardening
Group, depending on intended purpose: fire resistant mortars
Intended purpose: for binding of aluminosilicate products in refractory laying

MSH-28

Type: aluminosilicate
Group: chamotte (Al2O3 28-45%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: semidry
Thermal and additional treatment: thermo-hardening
Group, depending on intended purpose: fire resistant mortars
Intended purpose: for binding of aluminosilicate products in refractory laying

MSH-31

Type: aluminosilicate
Group: chamotte (Al2O3 28-45%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: semidry
Thermal and additional treatment: thermo-hardening
Group, depending on intended purpose: fire resistant mortars
Intended purpose: for binding of aluminosilicate products in refractory laying