• GIR - home
  • Selection of products according to the parameters

SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS

Group
Grain size
Physical condition when delivered
Group, depending on intended purpose
Intended purpose
Reference document for product properties
Filter result:
products found: 8
SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 2 AND id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 27 AND value IN (162,332)) AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 0

MKBGS

Type: aluminosilicate
Group: mullite-corundum (Al2O3 72-95%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: semidry
Group, depending on intended purpose: fire resistant masses and mixes, including concrete
Intended purpose: for production of solid lining of heat aggregates elements, operating at temperature up to 1500°С

PGOSA

Type: aluminosilicate
Group: chamotte (Al2O3 28-45%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: moldable
Group, depending on intended purpose: fire resistant powders and fillers
Intended purpose: for production of mortars, refractory mixes and coating

PGOSB

Type: aluminosilicate
Group: chamotte (Al2O3 28-45%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: moldable
Group, depending on intended purpose: fire resistant powders and fillers
Intended purpose: for production of mortars, refractory mixes and coating

PGOSV

Type: aluminosilicate
Group: chamotte (Al2O3 28-45%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: moldable
Group, depending on intended purpose: fire resistant lump and powder semi-finished products
Intended purpose: for solid lining of steel teeming ladles с with the help of sand-throwing machines

PSHKA

Type: aluminosilicate
Group: chamotte (Al2O3 28-45%)
Refractoriness value: fire resistance (1580 to 1770°С)
Grain size: fine-grained
Physical condition when delivered: dry
Group, depending on intended purpose: fire resistant powders and fillers
Intended purpose: for production of mortars, refractory mixes and coating