SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS

for steel teeming ladle slide gates
for laying of various heat aggregates
products for laying of hot blast mains, orifices and blast furnace tuyere connections
for steel teeming from ladle
products of general purpose for laying of various heat aggregates
for tube recuperators
lining of other areas (i.e., all, except lining of iron receiver, melting belt, tuyere area)
lining of iron receiver, melting belt, tuyere area
checker work, fire grate for other places of laying of coke and coke-pitch furnaces, as well as dry coke-quenching installation chambers
for laying of charging holes, inspection shafts, wall of coke and coke-pitch furnace regenerators, arch brick, gas burners
For lining of doors of coke, coke-pitch furnaces, dressing of dry coke-quenching installation chambers, hearth bottom, gas burners
in working (not protected) lining of furnaces, not subject to exposure to melted iron, abrasion force and mechanical shocks, or in intermediate (protected insulation)
lining of steel teeming ladles
For open-hearth furnaces regenerators checkers
for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths
for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more
for steel pouring with the help of syphon method into casting-form and moulds, intermediate funnels with nozzles - for top casting
lining of cooling zones and chain, transition section and refrigerators
for cast ladles lining
For open-bottom mould trays, used at dead-melted steel casting
for syphon steel casting

Filter result:
products found: 49

SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 1 AND id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 2 AND value IN (117)) AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 20

SHK-37

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: average dense (P_tot 20-30%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: For lining of doors of coke, coke-pitch furnaces, dressing of dry coke-quenching installation chambers, hearth bottom, gas burners

SHK-39

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: average dense (P_tot 20-30%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: For lining of doors of coke, coke-pitch furnaces, dressing of dry coke-quenching installation chambers, hearth bottom, gas burners

SHKL-1.3

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: highly-porous (P_tot 45-75%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: in working (not protected) lining of furnaces, not subject to exposure to melted iron, abrasion force and mechanical shocks, or in intermediate (protected insulation)

SHKN-41

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: average dense (P_tot 20-30%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: For open-hearth furnaces regenerators checkers

SHKU-32

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: compacted (P_tot 16-20%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: lining of steel teeming ladles