SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS

for steel teeming from ladle
for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths
for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more

Periclase-chrome, mullite-corundum and carbon-containing refractories of PHGT, MKUGT grades
Technical requirements 306-071/1-2016
Chamotte refractories for lining of blast furnaces according to DSTU 2345-94 (GOST 1598-96)
Zirconia high refractories
Specification of Ukraine 26.2-00191738-004:2006 (with amendments No.1,2)

Chamotte refractories for lining of blast furnaces according to DSTU 2345-94 (GOST 1598-96)

Filter result:
products found: 5

SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 1 AND id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 10 AND value IN (9) AND pm.id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 4 AND value IN (142))) AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 0

CRK

Type: zirconium

Group: oxide zirconium

Refractoriness value: high fire resistance (1770 to 2000°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

CRR-2

Type: zirconium

Group: oxide zirconium

Refractoriness value: high fire resistance (1770 to 2000°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

PHGT

Type: magnesia spinel

Group: periclase-chrome (MgO ≥ 60%, Cr₂O₃ 4-20%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: heat treated

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: for steel teeming from ladle

SHPD-39

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths

SHPD-41

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more