SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS

Shaped
products
Not shaped
products

products for laying of hot-blast stoves, hot blast mains, orifices and blast furnace tuyere connections
in working (not protected) lining of furnaces, not subject to exposure to melted iron, abrasion force and mechanical shocks, or in intermediate (protected insulation)
for lining of open-hearth furnaces and other heat aggregates
for laying of arches of open-hearth furnaces and other heat aggregates
for lining of heat-treatment furnaces and other heat aggregates
for lining of burners, muffler, applied in flame area of open-hearth glass furnace
for continuous steel teeming
for lining of feed refractories (openings, plungers, etc.) open-hearth glass furnace
in electric-steelmaking furnaces with the capacity of more than 50 t
in electric-steelmaking furnaces with the capacity of up to 50 t
for electric-steelmaking furnaces
for service in various heat aggregates at high temperature load
for lining of steel teeming ladles
for free-flow output from tundish ladle into crystallizer pan
for metal jet protection from oxidation
for steel teeming ladle slide gates
in ladle working lining
for laying of various heat aggregates
for steel blowing with inert gas
products for laying of hot blast mains, orifices and blast furnace tuyere connections
for laying of high temperature furnaces
for steel teeming from ladle
for lining of tap-holes for steel discharge from converter
for laying of arches of open-hearth, tandem and electric-steelmaking furnaces
for slag belt lining of steel teeming furnaces
for repair of converter working lining
for protection of apparatuses and construction structures, operated under conditions of aggressive acid environment and at lining of chimneys for withdrawal of gas containing aggressive substances
products of general purpose for laying of various heat aggregates
for tube recuperators
lining of other areas (i.e., all, except lining of iron receiver, melting belt, tuyere area)
lining of iron receiver, melting belt, tuyere area
checker work, fire grate for other places of laying of coke and coke-pitch furnaces, as well as dry coke-quenching installation chambers
for laying of charging holes, inspection shafts, wall of coke and coke-pitch furnace regenerators, arch brick, gas burners
For lining of doors of coke, coke-pitch furnaces, dressing of dry coke-quenching installation chambers, hearth bottom, gas burners
in working (not protected) lining of furnaces, not subject to exposure to melted iron, abrasion force and mechanical shocks, or in intermediate (protected insulation)
lining of steel teeming ladles
For open-hearth furnaces regenerators checkers
for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths
for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more
for steel pouring with the help of syphon method into casting-form and moulds, intermediate funnels with nozzles - for top casting
lining of cooling zones and chain, transition section and refrigerators
for cast ladles lining
for protection of furnaces with temperature 1750°С from aggressive impact of melted metal, arch laying.
for lining of revolving furnaces, used in cement sector and other industry sectors
For open-bottom mould trays, used at dead-melted steel casting
for syphon steel casting
for laying of arches of open-hearth furnaces
for laying of arches of open-hearth and electric-steelmaking furnaces
for lining of high temperature heat aggregates
for melting space arch of open-hearth furnaces, operating without bath oxygen lancing, as well as arches of slag chambers and regenerators
elements of bottom plate and separation plate between Bacor and silica

Filter result:
products found: 1

SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 1 AND id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 11 AND value IN (345)) AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 0

PHSU

Type: magnesia spinel

Group: periclase-chrome (MgO ≥ 60%, Cr₂O₃ 4-20%)

Refractoriness value: high fire resistance (1770 to 2000°С)

Porosity degree: compacted (P_tot 16-20%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: for laying of arches of open-hearth and electric-steelmaking furnaces