- GIR - home
- Selection of products according to the parameters
SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS
Type
Group
- silica (SiO2 > 93%)
- made of quartz (siliciferous) glass (SiO2 ≥ 98%)
- mullite-corundum (Al2O3 72-95%)
- mullite silica (Al2O3 45-62%)
- mullite (Al2O3 62-72%)
- periclase (MgO ≥ 85%)
- periclase-carbonaceous (С 2-40%, MgO ≥ 60%)
- periclase-chrome (MgO ≥ 60%, Cr2O3 4-20%)
- chrome-periclase (MgO 40-60%, Cr2O3 15-35%)
- acid-resistant ware
- chamotte (Al2O3 28-45%)
- silicon carbide containing (SiC 15-70%)
- alumina
- silica with additions (SiO2 - 80-93%)
- zircon
- alumina-oxide zirconium-silicious
- oxide zirconium
Refractoriness value
Porosity degree
Heat treatment method
Binding type 1
Intended purpose
scope of application
- products for laying of hot-blast stoves, hot blast mains, orifices and blast furnace tuyere connections
- in working (not protected) lining of furnaces, not subject to exposure to melted iron, abrasion force and mechanical shocks, or in intermediate (protected insulation)
- for lining of open-hearth furnaces and other heat aggregates
- for laying of arches of open-hearth furnaces and other heat aggregates
- for lining of heat-treatment furnaces and other heat aggregates
- for lining of burners, muffler, applied in flame area of open-hearth glass furnace
- for continuous steel teeming
- for lining of feed refractories (openings, plungers, etc.) open-hearth glass furnace
- in electric-steelmaking furnaces with the capacity of more than 50 t
- in electric-steelmaking furnaces with the capacity of up to 50 t
- for electric-steelmaking furnaces
- for service in various heat aggregates at high temperature load
- for lining of steel teeming ladles
- for free-flow output from tundish ladle into crystallizer pan
- for metal jet protection from oxidation
- for steel teeming ladle slide gates
- in ladle working lining
- for laying of various heat aggregates
- for steel blowing with inert gas
- products for laying of hot blast mains, orifices and blast furnace tuyere connections
- for laying of high temperature furnaces
- for steel teeming from ladle
- for lining of tap-holes for steel discharge from converter
- for laying of arches of open-hearth, tandem and electric-steelmaking furnaces
- for slag belt lining of steel teeming furnaces
- for repair of converter working lining
- for protection of apparatuses and construction structures, operated under conditions of aggressive acid environment and at lining of chimneys for withdrawal of gas containing aggressive substances
- products of general purpose for laying of various heat aggregates
- for tube recuperators
- lining of other areas (i.e., all, except lining of iron receiver, melting belt, tuyere area)
- lining of iron receiver, melting belt, tuyere area
- checker work, fire grate for other places of laying of coke and coke-pitch furnaces, as well as dry coke-quenching installation chambers
- for laying of charging holes, inspection shafts, wall of coke and coke-pitch furnace regenerators, arch brick, gas burners
- For lining of doors of coke, coke-pitch furnaces, dressing of dry coke-quenching installation chambers, hearth bottom, gas burners
- in working (not protected) lining of furnaces, not subject to exposure to melted iron, abrasion force and mechanical shocks, or in intermediate (protected insulation)
- lining of steel teeming ladles
- For open-hearth furnaces regenerators checkers
- for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths
- for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more
- for steel pouring with the help of syphon method into casting-form and moulds, intermediate funnels with nozzles - for top casting
- lining of cooling zones and chain, transition section and refrigerators
- for cast ladles lining
- for protection of furnaces with temperature 1750°С from aggressive impact of melted metal, arch laying.
- for lining of revolving furnaces, used in cement sector and other industry sectors
- For open-bottom mould trays, used at dead-melted steel casting
- for syphon steel casting
- for laying of arches of open-hearth furnaces
- for laying of arches of open-hearth and electric-steelmaking furnaces
- for lining of high temperature heat aggregates
- for melting space arch of open-hearth furnaces, operating without bath oxygen lancing, as well as arches of slag chambers and regenerators
- elements of bottom plate and separation plate between Bacor and silica
Reference document for product properties
- Refractory and high-refractory products for laying of hot blast stoves and mains of blast furnaces according to Specification of Ukraine 23.2-00190503-432:2018
- Lightweight, heat insulating refractory and high refractory products according to DSTU 2342-94 (GOST 5040-96)
- Silica refractories according to Specification of Ukraine 23.2-00191738-010:2018
- Silica refractories for lining of open-hearth glass furnace according to Specification of Ukraine 23.2-00191738-011:2018
- Silica refractories for open-hearth glass furnace top structure laying
Specification of Ukraine 26.2-00191738-002:2005 (with amendments No.1,2) - Zircon containing high refractory products for open-hearth glass furnace.
Specification of Ukraine 26.2-00191738-006:2006 (with amendments No.1,2) - Refractory and high refractory products for continuous steel teeming
Specification of Ukraine 23.2-00190503-360:2013 - Silica refractories for electric-steelmaking furnaces according to DSTU 2343-94 (GOST 1566-96)
- Heat resistant silica refractories for electric-steelmaking furnaces
Specification of Ukraine 26.2-00191738-005:2006 (with amendments No.1, 2) - Heat resistant silica refractories with addition of heat resistant silica refractories chrome-magnesian spinel for electric-steelmaking furnaces.
Specification of Ukraine 23.2-00191738-008:2013 - Quartz glass refractories
Specification of Ukraine 26.2-00190503-313:2008 - Unburnt quartzitic refractories for lining of steel teeming ladles
Specification of Ukraine 26.2-00190503-314:2008 (with amendment No.1) - Refractories for steel teeming ladle slide gates
Specification of Ukraine 26.2-00190503-350:2011 - Alumina and high-aluminous refractories according to GOST 24704-94
- Mullite-corundum blocks and mullite silica for steel blowing with inert gas
Specification of Ukraine 23.2-00190503-388:2013 - Periclase refractories according to GOST 4689-94
- Stopper refractories for steel teeming from ladle according to DSTU GOST 5500:2006
- Periclase and periclase-chrome refractories for are used for converter steel-tapping hole and open-hearth furnaces
Specification of Ukraine 26.2-00190503-351:2011 - Periclase-chrome, mullite-corundum and carbon-containing refractories of PHGT, MKUGT grades
Technical requirements 306-071/1-2016 - Temperature resistant, magnesian, periclase, chrome-periclase and periclase-chrome refractories for industrial heat aggregates
Specification of Ukraine 23.2-34283984-026:2012 - Periclase-chrome high refractory products for laying of arches of steelmaking furnaces according to according to DSTU 2573-94 (GOST 10888-93)
- Refractory and high refractory products for lining of revolving furnaces according to according to DSTU GOST 21436:2006
- Chrome-periclase high refractory products according to according to DSTU 2509-94 (GOST 5381-93)
- Acid resistant brick according to DSTU Б В.2.7-255:2011
- Chamotte and semiacid refractory products of general purpose according to GOST 390-96
- Chamotte and chamotte-silicon-carbide refractory products for tube recuperators
Specification of Ukraine 23.2-00190503-384:2013 - Aluminosilicate refractories for cupola furnace lining according to DSTU GOST 3272:2006
- Refractories for coke production aggregates
Specification of Ukraine 23.2-00190503-357:2012 - Aluminosilicate refractories for lining of steel teeming ladles according to GOST 5341-98
- Refractories for open-hearth furnaces regenerators checkers
Specification of Ukraine 26.2-00190503-231-2002 - Chamotte refractories for lining of blast furnaces according to DSTU 2345-94 (GOST 1598-96)
- Refractories for syphon steel teeming according to DSTU GOST 11586:2006
- Chamotte refractories for cast ladles lining according to GOST 15635-70 (with amendments No.1,2,3)
- Alumina refractories
Specification 1569-031-11703779-2003 - Periclase-chrome high refractory products for lining of steel teeming ladles of PHKUT grade
Technical requirements 306-072-2016 - Chamotte-graphite refractories
Specification of Ukraine 26.2-00190503-239-2003 (with amendments No.1) - Silica refractories for coke furnaces
Specification of Ukraine 23.2-00190503-409:2015 - Zirconia high refractories
Specification of Ukraine 26.2-00191738-004:2006 (with amendments No.1,2) - Refractory plates for ladle slide gate
Technical requirements 306-032-2014 - High refractories and refractories for lining of hot-blast stoves and hot blast mains of the blast furnaces, lining of steel teeming ladles
Technical requirements 306-103-2016 - Heat insulating lightweight silica refractories.
Specification of Ukraine 23.2-00191738-007:2012 - Silica refractories for coke furnaces
Specification of Ukraine 23.2-00191738-001:2020
Reference documents for product dimensions
- Refractory and high-refractory products for laying of hot blast stoves and mains of blast furnaces according to Specification of Ukraine 23.2-00190503-432:2018
- Refractories of general purpose according to DSTU GOST 8691:2009 (ISO 5019-1-84) (with amendments No.1,2,3,4)
- Silica and chamotte refractories for lining of open-hearth furnaces according to DSTU GOST 6024:2009 (ISO 5019-3-84) (with amendments No.1,2,3)
- Silica refractories for lining of open-hearth glass furnace according to Specification of Ukraine 23.2-00191738-011:2018
- Silica refractories for electric-steelmaking furnaces according to DSTU 2343-94 (GOST 1566-96)
- Aluminosilicate refractories for lining of steel teeming ladles according to GOST 5341-98
- Periclase refractories according to GOST 4689-94
- Stopper refractories for steel teeming from ladle according to DSTU GOST 5500:2006
- Periclase-chrome high refractory products for laying of arches of steelmaking furnaces according to DSTU 2573-94 (GOST 10888-93)
- Refractory and high refractory products for lining of revolving furnaces according to DSTU GOST 21436:2006
- Chrome-periclase high refractory products according to DSTU 2509-94 (GOST 5381-93)
- Acid resistant brick according to DSTU Б В.2.7-255:2011
- Aluminosilicate refractories for cupola furnace lining according to DSTU GOST 3272:2006
- according to DSTU 2345-94 (GOST 1598-96), according to DSTU GOST 6024, according to DSTU GOST 8691:2009 (ISO 5019-1-84) (with amendments No.1,2,3,4)
- Chamotte refractories for lining of blast furnaces according to DSTU 2345-94 (GOST 1598-96)
- Refractories for syphon steel teeming according to DSTU GOST 11586:2006
- Chamotte refractories for cast ladles lining according to GOST 15635-70 (with amendments No.1,2,3)
- Refractories of general purpose according to GOST 8691-73
- according to DSTU GOST 6024:2009 (ISO 5019-3-84) (with amendments No.1,2,3),Specification of Ukraine 23.2-00190503-432:2018, according to DSTU GOST 8691:2009
- according to DSTU 2344-94 (GOST 10381-94)
SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 1 AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 5
CRR-2
Type: zirconium
Group: oxide zirconium
Refractoriness value: high fire resistance (1770 to 2000°С)
Porosity degree: dense (Ptot 10-16%)
Heat treatment method: burnt
Molding process: semidry forming
Intended purpose: repair/construction
CRS-1
Type: zirconium
Group: zircon
Refractoriness value: high fire resistance (1770 to 2000°С)
Porosity degree: compacted (Ptot 16-20%)
Heat treatment method: burnt
Molding process: semidry forming
Intended purpose: repair/construction
scope of application: for lining of feed refractories (openings, plungers, etc.) open-hearth glass furnace
CRS-2
Type: zirconium
Group: zircon
Refractoriness value: high fire resistance (1770 to 2000°С)
Porosity degree: compacted (Ptot 16-20%)
Heat treatment method: burnt
Molding process: semidry forming
Intended purpose: repair/construction
scope of application: elements of bottom plate and separation plate between Bacor and silica
DK
Type: siliciferous
Group: silica (SiO2 > 93%)
Refractoriness value: fire resistance (1580 to 1770°С)
Heat treatment method: burnt
Molding process: semidry forming
Intended purpose: repair/construction
DK-1
Type: siliciferous
Group: silica (SiO2 > 93%)
Refractoriness value: fire resistance (1580 to 1770°С)
Heat treatment method: burnt
Molding process: semidry forming
Intended purpose: repair/construction
