SELECTION OF PRODUCTS ACCORDING TO THE PARAMETERS

for steel teeming from ladle
for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths
for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more

Stopper refractories for steel teeming from ladle according to DSTU GOST 5500:2006
Chamotte refractories for lining of blast furnaces according to DSTU 2345-94 (GOST 1598-96)

Filter result:
products found: 10

SELECT id, txt, site.txt_lang(txt, 3) as mark FROM products_marks WHERE type = 1 AND id IN (SELECT pm.id FROM products_marks pm, mark_properties mp WHERE pm.id = mp.mark AND property = 13 AND value IN (89,145)) AND hidden IS false ORDER BY mark LIMIT 5 OFFSET 0

PBSP-88 (INSERT)

Type: high-magnesia

Group: periclase (MgO ≥ 85%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: average dense (P_tot 20-30%)

Heat treatment method: unburnt

Molding process: semidry forming

Intended purpose: technology

scope of application: for steel teeming from ladle

PBSP-88 (NOZZLE)

Type: high-magnesia

Group: periclase (MgO ≥ 85%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: average dense (P_tot 20-30%)

Heat treatment method: unburnt

Molding process: semidry forming

Intended purpose: technology

scope of application: for steel teeming from ladle

SHGSP

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: average dense (P_tot 20-30%)

Heat treatment method: burnt

Molding process: soft mud forming

Intended purpose: technology

scope of application: for steel teeming from ladle

SHPD-39

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: for laying of shank shoulders, shank shoulders, belly and cooled part of the blast furnaces with the volume not less than 1719m3, not cooled part of the shaft and blast-furnace mouths

SHPD-41

Type: aluminosilicate

Group: chamotte (Al₂O₃ 28-45%)

Refractoriness value: fire resistance (1580 to 1770°С)

Porosity degree: dense (P_tot 10-16%)

Heat treatment method: burnt

Molding process: semidry forming

Intended purpose: repair/construction

scope of application: for laying of iron receiver of all the blast furnaces, shank shoulders, belly and cooled part of the blast furnace shaft with the volume 1719m3 and more